You have no items in your shopping cart.
Item Specifics
CONDITION: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions
COUNTRY/REGION OF MANUFACTURE: United Kingdom
UNIT QUANTITY: 1
BRAND: UMT
MPN: Does Not Apply
PRODUCT DETAILS:
IIC/I2C/TWI 1602 Serial Backlight LCD Display Module YwRobot For Arduino
PLEASE NOTE: This LCD includes the ywrobot module with the build in potentionmeter
Arduino IIC/I2C interface LCD1602 with Blue or yellow/green LCD
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- Old 1602 screen requires 7 IO ports but this module uses only two
- Much needed control panel IO ports can be used to add some sensors, SD card and so on
Power supply voltage: +5V
- Support I2C protocol
- I2C Address: It's either 0x27 or 0x3F
- Received an email from a customer saying that his board works with 0x3F
- Pin Definition : GND、VCC、SDA、SCL
- Power supply voltage: +5V
- Back lit (Blue with White char color)
- Size : 82x35x18 mm
- Contrast Adjust : Potentiometer
Item Specifics
CONDITION: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions
COUNTRY/REGION OF MANUFACTURE: United Kingdom
UNIT QUANTITY: 1
BRAND: UMT
MPN: Does Not Apply
PRODUCT DETAILS:
IIC/I2C/TWI 1602 Serial Backlight LCD Display Module YwRobot For Arduino
PLEASE NOTE: This LCD includes the ywrobot module with the build in potentionmeter
Arduino IIC/I2C interface LCD1602 with Blue or yellow/green LCD
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- Old 1602 screen requires 7 IO ports but this module uses only two
- Much needed control panel IO ports can be used to add some sensors, SD card and so on
Power supply voltage: +5V
- Support I2C protocol
- I2C Address: It's either 0x27 or 0x3F
- Received an email from a customer saying that his board works with 0x3F
- Pin Definition : GND、VCC、SDA、SCL
- Power supply voltage: +5V
- Back lit (Blue with White char color)
- Size : 82x35x18 mm
- Contrast Adjust : Potentiometer
size | chest(in.) | waist(in.) | hips(in.) |
---|---|---|---|
XS | 34-36 | 27-29 | 34.5-36.5 |
S | 36-38 | 29-31 | 36.5-38.5 |
M | 38-40 | 31-33 | 38.5-40.5 |
L | 40-42 | 33-36 | 40.5-43.5 |
XL | 42-45 | 36-40 | 43.5-47.5 |
XXL | 45-48 | 40-44 | 47.5-51.5 |
size | chest(in.) | waist(in.) | hips(in.) |
---|---|---|---|
XS | 34-36 | 27-29 | 34.5-36.5 |
S | 36-38 | 29-31 | 36.5-38.5 |
M | 38-40 | 31-33 | 38.5-40.5 |
L | 40-42 | 33-36 | 40.5-43.5 |
XL | 42-45 | 36-40 | 43.5-47.5 |
XXL | 45-48 | 40-44 | 47.5-51.5 |